Quatech DSPR-100 Manuale Utente

DSP-100Dual Channel RS-232 PCMCIAAsynchronous Adapterfor PCMCIA Card Standard compatible machinesUser's ManualQUATECH, INC. TEL: (330) 655-900056

2.1.2.2 Example 2DEVICE = C:\DSP-100\DSP130CL.SYS (b290,i11)In example 2, a single command line argument is provided. The Client Driver willattempt

2.1.2.6 Example 6DEVICE = C:\DSP-100\DSP130CL.SYS (b300,i5) ( ) (i10)In example 6, the three command line arguments of example 5 have been rearranged.

Available Resources:One function of the Card and Socket Services software is to track which systemresources (memory addresses, I/O addresses, IRQs, et

The DSP-100 Enabler does not support automatic configuration of adapters uponinsertion, more commonly referred to as "Hot Swapping". This

Waddress specifies the base address of the memory window required to configure theDSP-100. Set address = D0 for a memory window at segment D000, addr

2.2.1.5 Example 5DSP130EN.EXE (o1,i5,b340,s1)In example 2, the Enabler will configure the DSP-100 in socket 1 with a base address of340H and IRQ 5 us

Card and Socket Services Software:In order to use the DSP-100 Enabler for DOS, the system MUST NOT be configuredwith Card and Socket Services software

3. Windows 95/98/Millennium (ME)To allow easy configuration of the DSP-100, a Windows 95/98/ME "INF"configuration file has been written f

To view and/or edit hardware devices in Windows 95/98/ME use the system DeviceManager. To access Device Manager double click the System icon in the

5. Several predefined Basic Configurations have been included for the DSP-100(see Figure 5. DSP-100 Basic Configuration Table). The Basic Configurat

Warranty InformationQuatech Inc. warrants the DSP-100 to be free of defects for one (5) year from the date of purchase. Quatech Inc. will re

Base I/O Address Resource Modification Not Allowed:The DSP-100 is configured to allow only a fixed number of base I/O addresses. Tochange the I/O add

4 Windows 2000/XPTo allow easy configuration of the DSP-100, a Windows 2000/XP "INF" configurationfile has been written for the hardware.

4. Double click ‘Serial Port Adapters’5. Double click ‘Drivers’4-2 DSP-100 (Rev. G and later) User’s Manual www.bb-elec.com [email protected] sup

6. Double click on ‘Windows 2000, XP, for PCI, PCMCIA, ISA’7. Click on ‘qserbrd’ and select openWindows 2000/XP 4-3 www.bb-elec.com orders@bb-elec.

8. Select ‘OK’ at the ‘Files Needed’ window\9. The same process as above in steps 1-9 will apply for the next file ‘qserpt.inf’.In step 7 be sure to c

Windows 2000/XP handles the DSP-100 as a "parent/child device". v The DSP-100 is the "parent device" and is listed under the hardw

4.2.1 Viewing Resource Settings with Device Manager1. Start the Windows 2000/XP Device Manager.2. Double click on the hardware class Quatech Multiport

6. Use the COM Port device names (COM5, COM6, etc.) to access any of theparticular serial ports on the DSP-100. This name is required by a Windows200

4-8 DSP-100 (Rev. G and later) User’s Manual www.bb-elec.com [email protected] [email protected] International Office: 707 Dayton Road PO Box 1

The X8 clock mode locks the ports hardware clockat eight times the standard rate. The baud ratethe port runs at will always be eight times therate re

Declaration of ConformityManufacturer's Name: Quatech, Inc.Manufacturer's Address: 5675 Hudson Industrial Pkwy.Hudson, OH 44236 (USA)Applica

0004Variable3F0-3FF00040003Variable2F0-2FF00030002Variable3E0-3EF0002 0001Variable2E0-2EF 0001 0000VariableVariable 0000 BasicConfigurationIRQI/O Rang

7. Windows 2000/XP should have chosen an available Interrupt Requestsetting automatically when the I/O address range was configured by a BasicConfigur

This page intentionally left blank.5-1 DSP-100 (Rev. G and later) User’s Manual www.bb-elec.com [email protected] [email protected] Internation

5 Windows NT5.1 Installing DSP-100To allow easy configuration of the DSP-100 the Quatech Device Manager for WindowsNT has been written for the hardwa

1. Locate and double click the Quatech Device Manager icon on the desktopDevice Manager Icon on Desktop5-3 DSP-100 (Rev. G and later) User’s Manual

2. Click the ‘Add’ button at the bottom of the Quatech Device Manager Window3. Follow the steps for the ‘Add Quatech Hardware Wizard’.Windows NT 5-4

4. Complete the final steps of the installation, shut down Windows NT insertthe PCMCIA Card and re-boot the computer.Additional help is available onli

6. External ConnectionsAn adapter cable is included with the DSP-100 to convert the 9-pin PCMCIA outputconnector into a standard D-9 male connector,

This page intentionally left blank.7-1 DSP-100 (Rev. G and later) User’s Manual www.bb-elec.com [email protected] [email protected] Internation

7. SpecificationsBus Interface PCMCIA PC Card Standard 2.1 compliantPhysical Dimensions Type II PCMCIA card (5mm)Maximum Baud Rate 921.6KPower Requir

Table of Contents7-2Specifications... ...6-1External Connections...

DSP-100User's ManualRevision 3.20February 2005P/N 940-0088-320Quatech, Inc. www.bb-elec.com [email protected] [email protected] Internatio

1. IntroductionThe DSP-100 is a dual channel RS-232 asynchronous serial adapter for systemsequipped with PCMCIA Type II and/or Type III expansion soc

This page intentionally left blank.2-1 DSP-100 (Rev. G and later) User’s Manual www.bb-elec.com [email protected] [email protected] Internation

2. DOS/Windows 3.xNote: Quatech PCMCIA DOS support is dependent upon type of machineand card and socket services software support. DOS support is

2.1 DSP-100 Client Driver for DOSIn order to use the DSP-100 Client Driver, the system must be configured with Cardand Socket Services software. Card

DSP-100 Enabler program must be used to configure the adapter. If theClient Driver reports the desired adapter configuration, the installationproces